GE Dishwasher Not Draining Fixed
|

(Fixed!) GE Dishwasher Not Draining

The GE Dishwashers are well known for their versatile draining or water disposal systems, allowing them to clean numerous dishes quickly. 

However, several factors within this machine oppose this draining feature and can be a big upset in the overall usability of this amazing home appliance. But what are those factors?

Quick Info

Mainly, a clogged drain hose or air gap is considered the main issue for excess storage in the rear tub of the GE dishwashers. However, blocked filters, faulty drainage pipes, and improper installation can also be a big asset in ruining the water disposal system in this machine.

Read this blog till the end & discover how this issue occurs and if it is really simple to fix this at home.

Meaning | Causes of GE Dishwasher not Draining

IssueMeaning and Possible Causes
Clogged Drain HoseWater can’t exit due to blockage or kinks.
Clogged Air Gaps or Garbage DisposalObstructions prevent proper drainage.
Faulty Drain PumpA malfunctioning pump hinders water removal.
Blocked Filter or StrainerDebris in the filter/strainer impedes flow.
Improper InstallationIncorrect installation affects drainage.
Drain Solenoid or Valve IssueDysfunction prevents water from draining.
Faulty Control BoardA malfunctioning control board disrupts drainage.

How To Fix the GE Dishwasher Draining Issues?

How To Fix the GE Dishwasher Draining Issues
  • Start by reviewing your Dishwasher model and what type of filter it uses. Then check if any large object like food items (Bones, Tendons, Noodles) is stuck at the bottom of the tub. 
  • After removing the large objects, check if the drain hose pipe is connected at the bottom of the sink just below the rear tub to remove the water. If the pipe is blocked, ensure it is cleaned and working accurately.
  • Don’t try to put your hand in the garbage disposer; it can cut your hand. Try using this electric disposal garbage feature and then run the water cycle. It removes all the debris from the air gap as well.
  • Remove the cap of the air gap so that the air can create pressure for water to flow. Make sure to remove the drain plug from the bottom as well. Otherwise, the water pressure inside the tub would burst by damaging the dishwasher.
  • Lastly, use normal dishwashing detergents that may not produce too much foam. It would stick inside the pipes and choke them unnecessarily.

GE Dishwasher Model Filters – Which One Doesn’t Drain?

GE Dishwasher Model Filters Which One Doesn’t Drain

Depending on the model of the GE dishwasher, you can figure out what type of filter it has for draining water. 

In the models without ultra-fine filters at the bottom of the tub, it is normal to find at least 2-3 cups of water present there. This filter holds some water and disposes it when more water is added.

On the other hand, models with ultra-fine filters don’t include water storage at all. They dispose of water as soon as it enters the tub. This filter can be your best choice, but all major issues, such as those mentioned above, do occur with it.

Why is the GE Dishwasher Drain Pump Not Working?

GE Dishwasher Drain Pump Not Working

Drain pump failure is the main reason your GE dishwasher cannot dispose of water out of the tub to the outside. Here’s what you can do,

  • Check if there is any clog or obstruction in the drain pipe. If there is, fix it.
  • The drain pump works on the electric motor. Ensure the motor is not damaged and the device has a good current supply.
  • In case of any physical or technical issue, replace the pipe.
  • Consult a professional for more help.

Frequently Asked Questions 

Your new GE dishwasher may need to be properly drained for several reasons. First, ensure the dishwasher receives power and the plug is securely connected.

Check the drain hose and ensure it is arranged correctly and not kinked. Finally, make sure the filters are clean and clear of debris. 

If you have standing water in your GE dishwasher, here are some steps to help drain it: First, turn off the power to the dishwasher.

Then, locate the drain hose and disconnect it from the sink or disposal. Next, use a bucket or container to catch the water from the hose. Finally, run the dishwasher on a cycle without dishes to ensure the drain is clear.

First, turn off the power to drain a GE dishwasher with a knob. Then, locate the valve that provides water to the dishwasher and turn it clockwise to turn off the water.

Next, place a container under the drain valve. Finally, turn the drain valve counter-clockwise using pliers and allow the water to drain completely.

If your dishwasher is not draining, it may be due to a clogged drain. Here’s how to unclog it: first, reach inside the dishwasher and clear away any visible debris or food.

Next, check the drain hose for kinks or clogs and remove any obstructions. Finally, check the garbage disposal or sink drain linked to the dishwasher to ensure they are clear of clogs.

To prevent dishwasher drainage problems, remember to rinse dishes before loading them. This can help ensure that food debris does not clog the drain. Also, regularly clean the dishwasher filters and immediately address any leaks or drain problems.

Conclusion

There are many reasons why your GE dishwasher may need to be draining correctly, and various ways exist to solve these issues. 

Check the power, drain hose, filters, and drain pump for problems. If you’re experiencing a clog, remove visible debris and check for obstructions in the hose or sink.

And lastly, remember the importance of regular maintenance and preventative measures to keep your dishwasher running smoothly for years to come.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *