4 Best Ways To Fix GE Dishwasher No Power No Lights

Is your GE dishwasher not showing any signs of power? Are the lights off? Don’t worry; this implies that the dishwasher is running into technical difficulties and might need a small fix. While this is a minor issue, it could’ve happened for numerous reasons.

Quick Info

The most common reason is that the dishwasher door is not properly closed. This halts the machine’s function and doesn’t proceed any further. Other possible issues are power troubles from your main supply, your child safety lock being engaged, or sometimes the wash cycle getting interrupted.

In this guide, I will elaborate on these issues and what you can do to fix them. While this problem can be diagnosed by yourself, I recommend contacting a technician if you have any doubts.

( Quick Steps ) of GE Dishwasher No Power No Lights

Door Closing Issue1-Ensure proper door closure
2-Check for any obstructions 
3-Clean the rubber seal 
4-Adjust the inside rack if necessary
Power Supply Problems1-Check circuit breaker 
2-Ensure a tight plug connection 
3-Test outlet with another device 
4-Inspect the cord for damage
Child Safety Lock1-Locate the lock button or icon 
2-Press and hold for three seconds 
3-Refer to the manual for specific instructions
Interrupted Wash Cycle1-Turn off and wait, then switch back on 
2-Unplug for a few minutes and plug back in 
3-Reset through machine settings

4 Reasons GE Dishwasher No Power No Lights – (With Solutions)

1. Door Closing Issue

The dishwasher door needs to be closed properly for it to function. There’s a safety switch linked to the door.

It makes sure everything’s in place before the dishwasher starts its magic. If the door isn’t closed well, this safety switch stops the dishwasher from starting.

Step-By-Step: How to Ensure Proper Door Closure

  1. Start by gently opening the dishwasher door and then close it firmly. Sometimes, it might seem shut, but it’s not securely latched. Push it until you hear a click.
  2. Ensure no dishes or utensils are sticking out or blocking the door’s path. Sometimes, a misplaced dish might prevent the door from closing completely.
  3. The rubber seal across the door, referred to as the gasket, needs attention too. Wipe it clean with a damp cloth to remove any food particles. A smooth gasket will let the door shut easily.
  4. Occasionally, the rack’s inside might prevent the door from closing. Gently adjust it to make sure it is not interfering in the matter.

2. Power Supply Problems

A power supply issue could’ve happened due to numerous problems. Mostly, your circuit breaker in the main power board is shut off. Turn it on to restore power. If that doesn’t work, try these fixes:

  • Make sure your dishwasher is nicely plugged into the socket. Sometimes, plugs may be loose without you realizing it.
  • Try plugging something small into the opening where the dishwasher is plugged. If it works, the outlet is operational.
  • Take the dishwasher plug out for a few minutes, then plug it back in. This can now and then restore small troubles.
  • Check the dishwasher’s cord for any damage, like cuts or frays. If you spot any, it’s best to replace them.

If none of those steps work, it’s best to ask someone more knowledgeable about electricity. They can help restore it properly.

3. Child Safety Lock

Just like vehicle doors have child locks to keep youngsters secure, some dishwashers have a unique locks, too.

It stops curious children from playing with or accidentally starting the dishwasher buttons. It stops kids from messing with the settings, preventing any accidents.

How to Deactivate the Lock

  • Look for a button or an icon that resembles a lock. It might be on the control panel or near the buttons. Press and hold it for about three seconds.
  • If you are unsure where the lock button is or how to turn it off, check the dishwasher’s manual. It has clear instructions on a way to deactivate the safety lock.
  • After pressing and holding the lock button, test if the lock symbol disappears or if you can now press other buttons without any problems. That way, the lock is off.

4. Interrupted Wash Cycle

When the dishwasher’s cycle gets interrupted, it doesn’t go further. This interruption can lead to electricity or light issues within the dishwasher. It’s like the dishwasher gets confused and needs a bit of nudge to remember what it was doing.

How to Fix

  • Start by turning the dishwasher’s power off. Wait for a minute or two, then switch it on again. This simple restart might reactivate the dishwasher’s memory.
  • If the electricity button does not work, try unplugging the dishwasher from the outlet for a few minutes. Then, plug it back in. This works like a full reboot for the dishwasher.

How to Reset Through Machine Settings

  • Look for the dishwasher’s manual. Look for steps to reset the dishwasher through its settings.
  • Normally, the guide might recommend holding the on button for a few seconds. If not, it would ask you to unplug the dishwasher for a few minutes to reset it completely.
  • Whatever the manual says, comply with the instructions step by step. It generally has a high-quality way to reset your dishwasher model.

Frequently Asked Questions 

To cancel a Whirlpool dishwasher cycle, close the door firmly and press and hold the Cancel/Drain button for 3 seconds. This will initiate a 2-minute drain cycle before resetting the control. Source: Whirlpool

If your GE dishwasher has no power, it could be due to several reasons. Check if the dishwasher is properly plugged in and if there’s a tripped circuit breaker. Ensure that the dishwasher’s control panel is not locked or in sleep mode.

To test your dishwasher’s power, you can follow these steps:

  • Make sure the dishwasher is plugged in securely.
  • Check if the power outlet is functioning correctly by plugging in another appliance.
  • Ensure that the dishwasher’s door is fully closed and latched.
  • Verify that the circuit breaker or fuse for the dishwasher is not tripped.
  • If the dishwasher still doesn’t receive power, it’s advisable to seek professional assistance or contact the manufacturer’s customer support.


When your GE dishwasher faces problems like interrupted cycles or power issues, simple troubleshooting steps can often bring it back to life. 

From checking energy connections to resetting the device, those solutions ensure simple and effective cleaning cycles. 

If all these checks and fixes don’t impact your machine, it’s best to call in a professional and let them look to see what’s up.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *